Fast Set Epoxy
$29.95 – $119.95
Add to Wishlist
Fast Set epoxy is VOC free, UV resistant and has a heat tolerance of 500°
Fast Set is great for first and second layers of your artwork. You can add another layer after 1-1/2 to 2 hours. Fast Set’s low smell and clear formula make this pleasant to work with.
Fast Set is a fast curing resin. *Which means even though it contains maximum UV inhibitors, it can amber faster than normal curing resins in comparable conditions. It is not recommended for use on light colored bases.*
Determine how much epoxy you’ll need, prepare your work area and have your tools ready. After mixing you’ll have somewhere between 5-10 minutes before the epoxy becomes unworkable.
FDA Compliant Resin- Complies with FDA 21 CFR 175.300
(Please see “How to Use” tab below for full instructions).
8 oz, 32oz, 1/2 gal, 1 gal kit.
*Not recommended for molds.*
What temperature does Fast Set work best in? Fast Set works best in temperatures between 70-75 degrees F.
What is the working time of Fast Set? After mixing you’ll have somewhere between 5-10 minutes before the epoxy becomes unworkable. You can get the most worktime by observing these tips:
Don’t warm Fast Set before or during mixing
Mix in a wide container with as much surface area as possible
Don’t mix too long
Mix slower. Friction causes heat
Don’t let it sit…mix it and apply it
How long is the cure time? Fast Set will cure to the touch in 1-1/2 to 2 hours and fully cure in 24 hours. If shipping, it is recommended to wait at least 72 hours.
Fast Set is FDA compliant and VOC free, it is made for pours less than 1/4? thick.
How does it react to the heat? Fast Set is heat resistant up to 500° F. You should not expose Fast Set to prolonged heat sources, this could amber the resin. For example: hanging a piece directly over a fireplace where it is exposed to long periods of high heat.
How can I get rid of bubbles? Torch the resin with the recommended torch.
Can I use a hairdryer or heat gun to pop bubbles in poured resin? A hairdryer or heat gun may not produce sufficient heat to pop bubbles in this resin. We recommend using an automatic lighting torch attachment with a propane canister. Even a small artist torch may not provide enough heat to pop bubbles. (See official FAQ page for picture/product reference and additional FAQs!)
My resin got really hot and clumpy. Resin cures by heat- when you mix up resin you should pour it immediately onto your work. If you leave a mass of mixed resin in a container, it will build up heat rapidly and it also dramatically reduces working time. (See FAQs page for full answer.)
Is Fast Set FDA compliant? Yes, all of our resins are FDA compliant (FDA 21 CFR 175.300).
Alisha Allen (verified owner) –
The #1 in my crafting needs! I use fast set from tumblers to pens to acrylic blanks! I literally couldn’t do my job efficiently without it!
my first time using this product, and its sample size, which is a plus, i do find it easy to work with, goes on kinda a white color and is drying clear.. i just wish i knew how long to mix so i did 4 minutes cause of last box i had been using