Fast Set Turbo Epoxy
Out of stock
$29.95 – $94.95
Fast Set Turbo is CCDIY’s latest and greatest innovation in the epoxy industry! Featuring the FASTEST cure time on the market, Fast Set Turbo is the perfect final coat for your tumbler or other projects. With a full cure time of only 55 minutes, your projects will be completed in record time! Our formula is also extra resistant to yellowing and discoloration, which means your tumblers will last for years to come.
The Fastest Curing Epoxy Available.
Fast Set Turbo is CCDIY’s latest and greatest innovation in the epoxy industry! Featuring the FASTEST cure time on the market, Fast Set Turbo is the perfect final coat for your tumbler or other projects. With a full cure time of only 55 minutes, your projects will be completed in record time! Our formula is also extra resistant to yellowing and discoloration, which means your tumblers will last for years to come.
Key Features:
- Record-breaking cure time
- Immediate bubble release
- Low viscosity for smooth and quick mixing
- 100% Satisfaction Guarantee
- Signature Counter Culture DIY Shine!
Directions:
- Measure equal parts A and B. Combine in a mixing cup and mix thoroughly., scraping sides and bottom, about one minute, or until clear.
- Apply to surface, coating evenly and moving quickly. Torch any bubbles immediately, then let dry.
- Apply second layer between one and four hours after first layer. Fully cured in 24 hours. For best adhesion, between layers, apply at 45 minutes to 2 hours from the first layer.
What you need to know before using Turbo:
There are a few things to be aware of when working with Fast Set Turbo. This product is unlike any other and behaves differently than our other epoxy products.
- Use THIN layers! Using thick layers of Turbo will cause waves, large bubbling and separation from the application surface, even after fully cured.
- Use LESS! Use half the amount of resin you would normally use.
- Work quickly! You only have about 10 minutes of work time at most!
- Make sure tumbler turners are level so resin does not develop thicker ends.
- Make sure each layer is completely dry before applying your next layer. (Mod Podge is not recommended due to the 72 hour dry time)
- Do NOT mix large quantities or overheat. This is important with all epoxy, and even more so with Fast Set Turbo.
- We don’t recommend adding additives, such as liquid colorants.
- Don’t cross-contaminate with other resins or hardeners.
- Pop bubbles with a propane torch, not a heat gun, while careful not to reach its smoke point.
- Store in a dry place at room temperature, with lids tightly closed. Keep in the original containers.
- This product is sensitive to moisture. When applying over alcohol inks, paints, or other products, allow 24h for them to dry fully before applying Fast Set Turbo.
Misty Leonard (verified owner) –
Amazing! Crystal clear finish and zero smell!
Tumbler Groove (verified owner) –
I knew y’all wouldn’t let us down!!
Absolutely perfect!!
Thank You for this!!
✨🙌☺️
Everything Tumbler Tutorials –
Im obsessed, Its amazing and I can’t wait to get my hands on more of it!
Thank you CCDIY for all the amazing products!
Stephanie B. (verified owner) –
This stuff is AMAZING! There is no smell and the finish is clear as glass. I love this stuff! Thank you CCDIY for another amazing product!
Kay (verified owner) –
Great product but leave it in the original bottle!!! Don’t use FIFO bottles at all because it will crystallize on part B. I didn’t know that so I put it into a FIFO bottle and went back later and found it had formed crystallized in the bottle.
jmkastl10 (verified owner) –
WOW!!!! This is amazing stuff. Just came in today and used it just about thirty minutes ago. I’ve been using another brand of super quick dry and this went on and virtually no bubbles. I love it!!! 🤗🤗🤗🤗
Vickie Jenson –
I received this product when I attending Tumblercon. Mindi helped me with all of my questions. I have been using this to test to see how it works on glitter glues, waterslides, vinyl sheets, etc. I waited 48 hours before I applied it to my tumblers when using glitter glues (not modpodge) and 24 hours for water slides to make sure all moisture was out of them. My temp in my craft area is around 78 degrees and I am in Texas where it is hotter than hell and as humid as a sauna right now! But, wow! Cures to the touch in 30 minutes, working time is around 5 minutes, so work fast! Amazing product! If you need to have a quick turn around, this is your product!
Lisa Brown (verified owner) –
I am loving FS-Turbo. It is amazing. I have no problems regardless of what coat I put on, meaning first_ middle_ or last. I follow the instructions to a T. I only use a thin coat and I work very fast. I do use quick coat a lot especially before applying the FS-Turbo! I just love it and plan to use this for most of my tumblers.
Susan Goodwin (verified owner) –
I love this stuff! A lot of people are having issues, me, nope! Dries in about an hour. No smell!!!! No bubbles!!! Already on my 2nd batch! Will continue using!
Glitter Gremlins (verified owner) –
I just bought a small set and I have to say it’s so easy to use. I have been using it as my first couple coats over glitter and it’s so quick and flawless. Definitely read and do as the information card tells you to do.
Trickey (verified owner) –
I love this epoxy. I struggle with the top coat being wavy so I just use a thicker and longer curing epoxy as my final coat. It dries super fast and has no smell. I’m sure with practice i can stop getting waves but using it for my bottom layers works out perfect.
T pascley (verified owner) –
Definitely read the instructions!! After following the instructions carefully!! I have come to love this epoxy!! They mean it when they say do not contaminate with other epoxy, Meaning if another epoxy isn’t FULLY cured before trying to apply a layer of turbo, strange bubble reactions will occur!! This product has made making custom orders possible faster. I love that I can make a basic glitter cup 5x faster!! I will continue to keep purchasing this amazing product!!
Kim (verified owner) –
Wow !!!! This is a game changer
Caitlin Hildebrand (verified owner) –
The best fast set ever. Dries and Cures in record time with glass finish!
kimhamilton255 (verified owner) –
Complete game changer! Amazing product, just make sure to seal everything with matte clear spray paint, and use very thin layers.
chandlethis (verified owner) –
BEST PRODUCT I HAVE EVER USED..THIS ONE IS A BIG GAME CHANGER..THANKS TO LINDSEY HOKE FOR SHOWING US HOW WELL THIS PRODUCT WORKS..I WILL BE ORDERING MORE SOON..LOVE TURBO EPOXY..
Mary Botosh (verified owner) –
This is an amazing epoxy!! Sets up so fast. It is great for so many projects…pens, pop sockets, small molds, cups, quick fix repairs and sooo much more. Mixed clear with very few bubbles. Will be my go to!!!
Christy Schaffer (verified owner) –
This is my go to! Stir fast, apply thin and torch. I haven’t had any issues at all. This stuff is seriously amazing!
amber.martin85 –
My aunt purchased this for me and it’s amazing you just need a small amount each layer and you get a glass like finish with no bubbles and no sticky texture.