HOW TO USE
Special application instructions for Marble paints: After you have cleaned your work and applied Stick Tight, then you will want to apply Quick Coat.
Surface Prep: All surfaces must be clean and free of dust or oil before application.
DIRECTIONS: Use a soft cloth or brush to apply. Continuously scrub in Stick Tight to the surface to ensure good coverage. Do not let the solution dry, rinse thoroughly with clean water, making sure to remove all of the solution.
Brush a very thin layer of Quick coat on you work and continue brushing until the coating is dry and your brush passes along your work smoothly with no drag or resistance. Use a hairdryer as you brush on Quick Coat to speed up the process; this will also help bridge Quick Coat over contaminated areas of the work to ensure a even resin finish. After the first layer is dry to the touch, apply a second layer of Quick Coat in the same fashion as the first.
When Quick Coat is dry to the touch you are ready for your topcoat of Artist Resin!