Fast Set Epoxy & Tumbler Coatings
(2 products)- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Original Fast Set Epoxy Resin - Quick Cure, High Gloss
★★★★★(81)From $29.95Unit price /Unavailable
Choose the fast-setting tumbler coating that fits your workflow. Counter Culture DIY offers two distinct options: Original Fast Set, a quick-cure epoxy for thin coating layers, and Fast Set Turbo, an extremely fast polyaspartic final coating for experienced tumbler makers. They are not the same formula and should be selected and applied differently.
Original Fast Set vs. Fast Set Turbo
| Feature | Original Fast Set | Fast Set Turbo |
|---|---|---|
| Formula | Two-part epoxy resin | Two-part polyaspartic coating, not epoxy |
| Mix ratio | 1:1 by volume | 1:1 by volume |
| Working time | Approximately 5-10 minutes | 5 minutes or less |
| Next-stage timing | Recoat in as little as 1.5-2 hours | Dry to the touch in about 55 minutes; recoat in approximately 45 minutes to 2 hours |
| Full cure | Approximately 24 hours | Approximately 24 hours |
| Best fit | Fast tumbler layers, pens, coasters, trays and other thin epoxy coatings | Very thin final coats applied by experienced tumbler makers |
For most makers seeking a fast epoxy, begin with Original Fast Set. Choose Turbo only when you are comfortable preparing everything in advance, working in five minutes or less and applying an extremely thin polyaspartic coat.
Choose Original Fast Set Epoxy
Original Fast Set Epoxy Resin provides the familiar behavior of epoxy with a shorter production schedule. It creates a clear, high-gloss coating, can be recoated in as little as 1.5-2 hours and reaches full cure in approximately 24 hours under normal room conditions. Its heat resistance is rated up to 500°F (about 260°C).
Use Original Fast Set for thin coating layers on tumblers, pens, coasters, trays and small art pieces. It is not a deep-pour casting resin, and its fast reaction means you should avoid large batches and excessive thickness.
Choose Fast Set Turbo
Fast Set Turbo is a specialized polyaspartic tumbler coating rather than epoxy. It is intended for extremely thin final coats and experienced makers who can complete the application within a five-minute-or-less working window.
Turbo becomes dry to the touch in about 55 minutes and reaches full cure in approximately 24 hours. It is moisture sensitive, should be kept separate from epoxy components and should not be combined with liquid colorants or unapproved additives. Allow paints, alcohol inks and similar underlying layers about 24 hours to dry before coating with Turbo.
Prepare before mixing
- Gather the tumbler, tools and coating supplies before combining Part A and Part B.
- Measure equal volumes of both parts and mix thoroughly according to the product directions.
- Apply promptly in a thin, even layer; neither product is intended for deep pours.
- Prepare and seal decorated or porous project elements with Quick Coat resin sealer and craft adhesive when appropriate, then allow it to dry completely according to its directions.
- For a longer working window, compare Artist Resin, which provides approximately 25-40 minutes for standard art and coating applications.
Fast-setting coating questions
Are Original Fast Set and Fast Set Turbo the same product?
No. Original Fast Set is epoxy resin. Turbo is a polyaspartic coating with a shorter working window and different preparation and application requirements.
Which formula is better for someone new to fast coatings?
Original Fast Set is the more familiar epoxy option, but its 5-10 minute working time still requires preparation and prompt application. Makers who need more time should consider Artist Resin. Turbo is best reserved for experienced makers comfortable with extremely fast, very thin applications.
Can either product be used for deep molds?
No. These products are designed for thin coating work. Use a casting or deep-pour resin for molds, flower preservation and thick encapsulation projects.
Does dry to the touch mean fully cured?
No. Turbo may be dry to the touch in about 55 minutes, but its full cure is approximately 24 hours. Always distinguish handling milestones from full cure and follow the product directions.