UV Resin Kit with 48W Lamp for Jewelry & Crafts

A coordinated UV resin kit with clear resin and a 48W foldable curing lamp. Choose a 4 oz, 8 oz, 16 oz, or 32 oz bottle of Counter Culture DIY UV Resin and receive the light needed to cure thin-layer jewelry, keychains, doming, embellishments, and other small craft projects.

This bundle gives new makers a complete resin-and-light setup while giving experienced artists a convenient production station. The one-part resin is ready to use directly from the bottle, so there is no resin-to-hardener ratio to measure.

What Is Included

• One bottle of clear, medium-viscosity Counter Culture DIY UV Resin in the selected size: 4 oz, 8 oz, 16 oz, or 32 oz
• One 48W foldable UV lamp system with two detachable lamp sections
• Clear shelves for positioning projects between the light sections
• Two USB-C power cords

Colorants, molds, jewelry hardware, glitter, tools, and project blanks are not included unless specifically stated elsewhere on the order.

UV Resin Kit Specifications

Projects for This UV Resin Starter Kit

• Jewelry, pendants, earrings, charms, and bezels
• Keychains, zipper pulls, ornaments, and small transparent molds
• Domed decals, labels, small artwork, and decorative coatings
• Resin pens, phone grips, and tumbler topper pieces
• Dried-flower inclusions, glitter accents, and small repairs

UV resin requires direct light exposure and works best for shallow pieces. Use a two-part coating resin for larger surfaces and a casting resin for deep molds.

How to Use the Resin and Lamp

1. Prepare a clean, dry project and place it on a level work surface.
2. Apply clear resin in a 1-2 mm (0.04-0.08 inch) layer. Transparent molds may support clear layers up to about 3 mm (about 1/8 inch).
3. Position the entire project within the lamp's curing area so the resin receives direct light.
4. With both lamp sections operating, begin with a 2-3 minute cure. If using one lamp section, begin with 4-5 minutes.
5. Check the piece. If any area is not fully hard and non-tacky, continue with additional one-minute cycles.

Dark pigments, heavy glitter, inclusions, thick layers, lamp distance, and blocked light can increase curing time. Build projects deeper than 3 mm (about 1/8 inch) in separately cured layers.

Why Choose the Bundle Instead of Resin Alone?

The bundle is designed for customers who need both the resin and a compatible curing light. If you already own a suitable lamp, purchase Clear UV Resin separately. If you only need a new light, choose the 48W Foldable UV Lamp.

For detailed setup, project guidance, and troubleshooting, read How to Use UV Resin: The Ultimate Guide.

Frequently Asked Questions

Does this kit include everything needed for a finished project?

The bundle includes UV resin and the curing-lamp system. Project-specific molds, hardware, colorants, glitter, and blanks are purchased separately.

Can the lamp cure regular two-part epoxy?

No. Standard two-part epoxy cures through a chemical reaction between resin and hardener. This lamp is designed for UV-curable materials.

Which resin size should I choose?

Choose based on your project volume. The formula is the same in every size, from the 4 oz bottle through the 32 oz bottle.

Safety and Storage

Wear gloves, work in a well-ventilated area, and avoid skin and eye contact with uncured resin. Do not stare directly into UV lights. Store the resin upright with the cap closed in a cool, dark place. Follow all product labels and safety information included with the resin and lamp.