Fast Set Turbo Epoxy

The Fastest Curing Epoxy Available.

Fast Set Turbo is CCDIY's latest and greatest innovation in the epoxy industry! Featuring the FASTEST cure time on the market, Fast Set Turbo is the perfect final coat for your tumbler or other projects. With a full cure time of only 55 minutes, your projects will be completed in record time! Our formula is also extra resistant to yellowing and discoloration, which means your tumblers will last for years to come. Working time is 5 mins or less.

Key Features:

• Record-breaking cure time
• Immediate bubble release
• Low viscosity for smooth and quick mixing
• 100% Satisfaction Guarantee
• Signature Counter Culture DIY Shine!

Directions:

1. Measure equal parts A and B. Combine in a mixing cup and mix thoroughly., scraping sides and bottom, about one minute, or until clear.
2. Apply to surface, coating evenly and moving quickly. Torch any bubbles immediately, then let dry.
3. Apply second layer around 45min after first layer. Fully cured in 24 hours. For best adhesion, between layers, apply at 45 minutes to 2 hours from the first layer.

What you need to know before using Turbo:

There are a few things to be aware of when working with Fast Set Turbo. This product is unlike any other and behaves differently than our other epoxy products.

• Use THIN layers! Using thick layers of Turbo will cause waves, large bubbling and separation from the application surface, even after fully cured.
• Use LESS! Use half the amount of resin you would normally use.
• Work quickly! You only have about 5 minutes of work time at most!
• Application surface MUST be prepped with a degreaser and sandpaper.
• Make sure tumbler turners are level so resin does not develop thicker ends.
• Make sure other products are completely dry before applying your Fast Set Turbo. (Mod Podge is not recommended due to the 72 hour dry time)
• Do NOT mix large quantities or overheat. This is important with all epoxy, and even more so with Fast Set Turbo.
• We don't recommend adding additives, such as liquid colorants.
• Don't cross-contaminate with other resins or hardeners.
• Pop bubbles with a propane torch, not a heat gun, while careful not to reach its smoke point.
• Store in a dry place at room temperature, with lids tightly closed. Keep in the original containers.
• This product is sensitive to moisture. When applying over alcohol inks, paints, or other products, allow 24h for them to dry fully before applying Fast Set Turbo.