DTF Remover - 16.9 fl oz | Rolled-Up Printing

DTF Remover - 16.9 fl oz | Rolled-Up Printing

Say goodbye to costly printing errors with the Rolled Up Printing DTF Remover. Designed for fast and efficient removal of DTF (Direct-to-Film) prints, this powerful solution is your ultimate quick-fix tool for saving time and resources. Whether you’re correcting a mistake or updating your design, this remover ensures clean, hassle-free results.

Key Features:

• Fast & Effective: Removes DTF prints effortlessly, minimizing downtime.
• User-Friendly Application: Simply apply the remover, let it set briefly, and wipe away with a fine abrasive tool. The product has a low odor.
• Cost-Saving Solution: Avoid wasted materials and reprints.

Usage Instructions:

1. Using the syringe, apply a generous amount of remover to the area of the DTF print that you wish to remove. (Please be careful to avoid any area you do not wish to remove)
2. Allow the solution to sit for around 30 seconds
3. Gently scrub the area with a fine abrasive product to lift the print. A foam dish sponge seems to do the trick!
4. Please repeat steps if needed

Safety Guidelines:

• Keep out of reach of children.
• Avoid contact with eyes or ingestion.
• Store in a cool, dry place, away from direct sunlight and extreme temperatures.

Volume: 16.9 fl oz

Take control of your printing projects with Rolled Up Printing DTF Remover—the trusted choice for professionals and hobbyists alike.

How to Use DTF Remover

Follow these simple steps to efficiently remove DTF (Direct-to-Film) prints using the Rolled Up Printing DTF Remover:

1. Prepare the Surface:
   Ensure the printed area is clean and dry before applying the remover. Place the garment or item on a flat, stable surface.

2. Apply the DTF Remover:
   Wearing gloves shake the bottle gently. Use the included syringe to apply an even layer of the remover directly onto the DTF print you wish to remove.

3. Let It Sit:
   Allow the remover to sit on the print for around 30 seconds. This gives it time to penetrate and break down the print material.

4. Gently Scrub:
   Using a fine abrasive product (such as a foam dish sponge, soft brush or cloth), scrub the treated area gently to lift the print. Avoid using excessive force to prevent damage to the fabric. For stubborn areas, repeat the application process if necessary.

5. Clean the Area:
   Rinse the treated area in the sink

6. Dry the Surface:
   Let the garment or item dry completely before proceeding with further printing or use. For best results, we suggest washing and let the item dry at this time. 

Tips for Best Results:

• Test on a small, inconspicuous area first to ensure compatibility with the material.
• Use in a well-ventilated area to avoid inhaling fumes.

With Rolled Up Printing DTF Remover, fixing mistakes has never been easier!